,

Mooer Radar


The MOOER RADAR is a full-featured professional speaker simulator which can be a permanent resident at the end of your pedalboard. Not only does it carry 30 cab models but it also has optional microphone and power amp simulation. Ideal for recording or hooked up to your favourite headphones for practice. The RADAR will transform your pedalboard into a complete guitar rig.

600.00 AED

The MOOER RADAR is a full-featured professional speaker simulator which can be a permanent resident at the end of your pedalboard. Not only does it carry 30 cab models but it also has optional microphone and power amp simulation. Ideal for recording or hooked up to your favourite headphones for practice. The RADAR will transform your pedalboard into a complete guitar rig.

Main Features

30 different speaker cab models

11 mic models

4 power amp models

Customizable EQ stage

Capable of loading custom IRS

Store and recall up to 36 user presets

Connect to PC editor via USB

Supports headphones and lineout

MOOER STUDIO EDITOR:

Download the MOOER STUDIO software from our Downloads & Firmware” page on the MOOERAUDIO website.

http://www.mooeraudio.com/?FirmwareUpdate.html

  1. After installation, connect your device to the computer using a USB cable
  2. Open the MOOER STUDIO software and select Search Device”
  3. Select your device from the drop-down menu
  4. Select Open Device”

FIRMWARE UPDATE:

  1. Connect your RADAR to the computer using a USB cable
  2. Press and hold the MENU” and power on the RADAR
  3. This will boot RADAR into Update Mode”
  4. Open the MOOER STUDIO software
  5. Press the Search Device” button and then select RADAR UPDATE” from the Device drop down menu
  6. Press the Update” button and wait for the update to complete

SPECIFICATIONS:

  • Input –1/4” mono audio jack.(Impedance: 100k Ω)
  • Output –1/4” mono audio jack (Impedance: 470 Ω)
  • 1/8” stereo audio jack (Impedance: 10 Ω)
  • Sampling rate – 44.1K
  • Sampling accuracy – 24bit
  • Signal to noise ratio – 100dB
  • Frequency Range – 20Hz~20KHz
  • Power requirements – 12V DC Only use the power supply provided
  • Current Draw – 300mA
  • Dimensions – 93.5mm(D) x 42mm(W) x 52mm(H)
  • Weight – 150g

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Mooer Radar”

There are no reviews yet.